en Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid disp.
Intensive drying
Hot water
1
Factory setting (may vary according to model)
38
Display text
Selection
1
H:04
H:00 - H:07
1
r:05
r:00 - r:06
1
d:00
d:00 - d:01
1
A:00
A:00 - A:01
Description
Set the water softening system to your
water hardness.
→ "Setting water softening system",
Page 28
Level H:00 switches the water soften-
ing system off.
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 30
Switch the rinse aid system off with
level r:00.
The temperature is increased during
the final rinse, which improves the dry-
ing result. This may increase the run-
ning time slightly.
Note: Not suitable for delicate items of
tableware.
Switch Intensive drying on "d:01" or off
"d:00".
Set cold water or hot water connec-
tion. Only set the appliance to hot wa-
ter if this can be prepared with little en-
ergy and a suitable installation is avail-
able, e.g. solar heating system with cir-
culation line. The water temperature
should be at least 40 °C and max.
60 °C.
Switch hot water on "A:01" or off
"A:00".