NEFF S Series User Manual page 48

en Troubleshooting
Errors
Wipeable or water-soluble
coatings are present inside
the appliance or on the door.
Stubborn white coatings are
present on tableware, inside
the appliance or the door.
Tea residue or lipstick marks
on tableware.
48
Cause
Detergent substances are de-
posited there. These coatings
cannot generally be removed
with chemicals.
White coating is deposited in
the appliance interior.
Special salt dispenser is not
screwed tight.
Detergent substances are de-
posited there. These coatings
cannot generally be removed
with chemicals.
The hardness range is set in-
correctly or the water hard-
ness is greater than 62°°E
(8,9 mmol/l).
3in1/organic/eco detergent is
not effective enough.
Too little detergent is being
used.
Washing programme selected
too weak.
Washing temperature is too
low.
Too little detergent is being
used or is unsuitable.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Troubleshooting
Change your detergent → Page 31.
▶
Clean the appliance mechanically.
▶
Set the water softening system cor-
1.
rectly.
In most cases you will need to in-
crease the setting.
Change your detergent if required.
2.
Screw the special salt dispenser tight.
▶
Change your detergent → Page 31.
▶
Clean the appliance mechanically.
▶
Set the Water softening system
▶
→ Page 27 to the water hardness or
add special salt.
Set the Water softening system
▶
→ Page 27 to the water hardness
and use separate detergents (propri-
etary detergent, special salt, rinse
aid).
Increase the amount of detergent
▶
used or change Detergent
→ Page 31.
Select a more intensive washing pro-
▶
gramme.
Adjust the sensitivity of the sensors.
▶
Select a programme with a higher
▶
washing temperature.
Use a suitable Detergent → Page 31
▶
and follow the manufacturer's instruc-
tions for the amount to be used.
Only remove large remnants of food
▶
and do not prerinse tableware.
Adjust the sensitivity of the sensors.
▶