Information On Display Panel; Malfunctions - NEFF S Series User Manual

Errors
Excessive formation of foam
occurs.

Information on display panel

Errors
Special salt refill indicator
lights up.
Refill indicator for special salt
does not light up.
Refill indicator for rinse aid
lights up.
Refill indicator for rinse aid
does not light up.
Display flashes.

Malfunctions

Errors
Water is left in the appliance
at the end of the programme.
Cause
Hand washing-up liquid is
present in dispenser for rinse
aid.
Rinse aid has been spilled.
Detergent or appliance care
product used causes excess-
ive foaming.
Cause
Insufficient special salt.
Sensor does not detect spe-
cial salt tablets.
Water softening system is
switched off.
Insufficient rinse aid.
Rinse aid system is switched
off.
Appliance door is not closed
properly.
Cause
Filter system or area under
the filters is blocked.
Programme has not yet
ended.
Troubleshooting en
Troubleshooting
Immediately add rinse aid to the dis-
▶
penser.
→ "Adding rinse aid", Page 30
Remove the rinse aid with a cloth.
▶
Change the brand of detergent.
▶
Troubleshooting
Add Special salt → Page 28.
▶
Do not use special salt tablets.
▶
Setting water softening system
▶
→ Page 28
Add Rinse aid → Page 30.
1.
Set the amount of rinse aid to be dis-
2.
pensed.
→ "Setting the amount of rinse aid",
▶
Page 30
Close the appliance door.
▶
Arrange the tableware so that
‒
no parts project beyond the
basket and prevent the appli-
ance door from closing prop-
erly.
Troubleshooting
Clean the Filters → Page 41.
1.
Clean the Wastewater pump
2.
→ Page 54.
Wait until the programme ends or
▶
cancel the programme with reset.
→ "Terminate programme", Page 36
▶
51