Installing And Connecting The Appliance; Drainage Connection; Drinking Water Connection - NEFF S Series User Manual

en Installation and connection
¡ Installation material
¡ Steam guard plate
¡ Rubber apron
¡ Mains cable
¡ Quick reference guide
Installing and connecting the
appliance
You can position your built-under or in-
tegrable appliance in a fitted kitchen
between wooden and plastic walls. If
you subsequently install your dish-
washer as a free-standing appliance,
you must stop it from tipping over, e.g.
by screwing it to the wall or installing it
under a continuous worktop that is se-
curely connected to adjacent cabinets.
Follow the safety instructions.
1.
→ Page 4
Follow the instructions for electrical
2.
connection. → Page 15
Check the Scope of supply
3.
→ Page 13 and the condition of the
appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
Install the drainage connection.
6.
→ Page 14
Install the drinking water connection.
7.
→ Page 14
Connect the appliance to the electri-
8.
city supply.
1
Depending on the appliance specifications
14
1
1
1

Drainage connection

Connect your appliance to drainage
connection so dirty water is discharged
via the wash cycle.
Installing the drainage connection
Consult the installation instructions
1.
supplied for the steps required here.
Connect the wastewater hose to the
2.
outlet connection of the siphon using
the enclosed parts.
When doing so, check that the
3.
wastewater hose is not kinked,
crushed or twisted.
Also check that there is no cover in
4.
the drainage system preventing the
wastewater from being discharged.

Drinking water connection

Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note: If you are replacing the appli-
ance, you must use a new water supply
hose.
Consult the installation instructions
1.
supplied for the steps required here.
Connect the appliance to the drink-
2.
ing water connection using the en-
closed parts.
Observe the Technical data
→ Page 56.
When doing so, check that the drink-
3.
ing water connection is not kinked,
crushed or twisted.