Childproof lock (door lock) * by a responsible person. – Do not lean or sit on the open door. The description of the childproof lock is at The appliance could tip. the back in the envelope.
Diagrams of the control panel and the power supply. Pull out the mains plug interior of the appliance can be found in or switch off the fuse. Turn off the tap. the envelope at the front. Disposal Individual positions are referred to in the text.
39‒62 5.5‒8.9 from : to : Salt is not required at the set value : – Find out about the hardness value of your tap water. Your water utility company will help you with this. – Set value can be found in the water hardness table.
You will destroy the water The water is displaced and runs out. softening system. As soon as the salt refill indicator H on – To prevent corrosion, always refill with the fascia is lit, top up the salt. salt immediately before switching on the appliance.
. This is the factory As soon as the rinse-aid refill indicator P setting : is lit on the fascia, there is still a rinse-aid Do not change the amount of rinse aid reserve of 1 – 2 rinsing processes. Refill unless streaks (select lower setting) or with rinse aid.
– does not obstruct rotation of the two spray arms 1: and 1J. Very small utensils should not be washed in the machine, as they may fall out of the baskets.
The drawer can be taken out. Small accessories holder * * depending on model Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small accessories holder. Folding spikes * * depending on model The spikes can be folded down to improve...
Page 11
Adjusting the height of the basket The height of the upper utensils basket 12 can be adjusted in 3 stages to create more space either in the upper or lower basket. Appliance height 81.5 cm Top basket Bottom basket Setting 1 max. ø...
Adding detergent Detergent – If the detergent dispenser 9" is still closed, press the lock 9* to open the You can use tablets as well as powder detergent dispenser. or liquid detergents for dishwashers, but Pour detergent into the dry detergent never use washing up liquid.
ã= the detergent may stick. Warnings – If you switch from combined – Do not place small parts for washing in detergents to solo detergents, ensure the tablet collecting tray 1B; this that the water softening system and prevents the tablet from dissolving amount of rinse aid have been set to evenly.
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of utensils Type of soiling Programme Possible additional Programme sequence options ¹ pots and pans,...
Half load * The Aqua sensor is used according to the programme. If the Aqua sensor is active, If you have only a few items to wash (e.g. “clean” rinsing water can be transferred to glasses, cups, plates), you can switch to the next rinse bath and water consumption “half load”.
X. If the appliance is installed at eye-level, – Press + or – button until the ` with flush furniture front, the light point is displayed time corresponds with your not visible.
Otherwise, expansion (pressure) Off after 1 min may cause the appliance door to Off after 120 min spring open or water to run out of the appliance. – Open the door. – Switch on ON/OFF switch (. – To continue the programme, switch on the ON/OFF switch ( again.
ON/OFF switch ( is switched on or off. Stainless steel appliances: To prevent When the door is closed or ajar, the light is corrosion, avoid using sponge cloths or off. wash them out thoroughly several times –...
Spray arms The filters 1Z keep large foreign objects Limescale and contaminants in the rinsing in the rinsing water away from the pump. water may block nozzles and bearings on the spray arms 1: and 1J. These foreign objects may occasionally block the filters.
ã= required. Warning – Using a spoon, prise off pump cover If on the digital display 8 an error code (as illustrated) until it clicks, then grip to : ), always disconnect the the cover by the lug and first pull it...
... on the appliance – Water is left in the appliance at the end of the programme. Lower spray arm rotates sluggishly. – ( : ) Waste water hose is blocked – Spray arm blocked. or kinked. The door is difficult to open. * Filters blocked.
– Filters incorrectly inserted. – Appliance door opened too early and – Waste water pump blocked. utensils taken out too early. – Top basket on right and left not set to – Programme selected without drying. same height. – Too little/unsuitable rinse aid.
(1) and the production date following paragraphs or in the installation (FD = 2) which can be found on the rating instructions. plate 92 on the appliance door. Install the appliance in the correct sequence: –...
ã= e.g. by screwing it to the wall or by Warning installing it under a continuous worktop If the appliance is not in a cavity and a which is screwed to adjacent side panel is accessible, the door hinge cupboards.
It is recommended to have a water – The appliance features a water temperature (temperature of the incoming damage protection system. Please water) of at least 40 °C and no more than note the system will not function 60 °C. unless the power supply is connected.
Protection against frost If the appliance is in a room where there is a risk of frost (e.g. holiday home), empty the appliance completely (see Transportation). – Turn off the tap, disconnect supply hose and drain water.
To do this, remove the top basket and insert the spray head as illustrated in the diagram. To ensure that the spray jet can reach all parts, arrange the baking sheets as illustrated (max.
Page 28
If your appliance is fitted with Aqua-Stop, you can leave your appliance unattended during operation and leave the tap turned on afterwards. The tap should only be turned off if you are absent from home for a prolonged period, e.g. several weeks holiday.