Rinse Aid System; Rinse Aid; Setting The Amount Of Rinse Aid; Switching Rinse Aid System Off - NEFF S Series User Manual

en Rinse aid system

Rinse aid system

You can use the rinse aid system and
rinse aid to get tableware and glasses
rinsed perfectly without marks.

Rinse aid

For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights up,
top up with rinse aid. Only use rinse aid
for domestic dishwashers.
Press the catch on the lid of the dis-
1.
penser for rinse aid
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it from
3.
the tub.
30
and lift ⁠ .
2
1
max
Spilled rinse aid can cause excess-
ive frothing during the wash cycle.
Close the lid of the dispenser for
4.
rinse aid.
a The lid clicks into position.
Setting the amount of rinse
aid
If there are streaks or water marks on
tableware, change the amount of rinse
aid.
Press ⁠ .
1.
Hold programme button A and press
2.
repeatedly until the display
shows H:xx.
Release programme button A and
3.
⁠ .
a Programme button A flashes and the
display shows H:04.
Press programme button A re-
4.
peatedly until the display shows the
value set at the factory r:05.
Press programme button C re-
5.
peatedly until the right amount of
rinse aid has been set.
– A low setting adds less rinse aid
during the wash cycle and re-
duces streaking on tableware.
– A higher setting adds more rinse
aid during the wash cycle, re-
duces water marks and improves
the drying result.
Press to save the setting.
6.

Switching rinse aid system off

If you find the rinse aid refill indicator ir-
ritating, e.g. when using combined de-
tergents with a rinse aid component,
you can switch the rinse aid system off.
Tip: The function of rinse aid is limited
with combined detergents. You will
generally get better results using rinse
aid.
Press ⁠ .
1.