Aquasensor; Installation And Connection; Scope Of Supply; Installing And Connecting The Appliance - NEFF S195ZB800E Information For Use

Zeolith drying therefore saves a great
deal of energy.
Tip: To avoid impairing Zeolith drying
performance, do not position table-
ware parts directly in front of the in-
take opening or the blow opening of
the Zeolith container.
Do not position heat-sensitive table-
ware parts directly in front of the blow
opening of the Zeolith container.
→ "Appliance", Page 15

AquaSensor

The AquaSensor is an optical meas-
uring device (light barrier) which
measures the turbidity of the rinsing
water. You can save water with the
AquaSensor.
Use of the AquaSensor depends on
the programme. If the soiling level is
high, the rinsing water is drained off
and replaced with fresh water. If the
soiling level is lower, the rinsing wa-
ter is used in the next wash cycle, so
reducing water consumption by 3-6
litres. In the automatic programmes
the temperature and run time are ad-
ditionally adjusted to the level of soil-
ing.
Installation and connection en

Installation and connection

Installation and connec-
tion
To ensure proper operation, connect
Installation and connection
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Operating instructions
¡ Installation Instructions
¡ Further information documents
¡ Installation material
¡ Steam guard plate
¡ Salt filling aid funnel
¡ Mains cable
¡ Quick reference guide
Installing and connecting the
appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
13