Technical Data - SCHOTT KL 2500 LED User Manual

KL 2500 LED – Operating instructions
Optical filters can either by inserted in the filter slide or used as screw-in or clip-on filters in
conjunction with a focusing attachment (accessory) in front of the light guide exit.
Details on the focusing attachment and available standard filter types can be found in our catalogue.
8. Technical data for KL 2500 LED
Properties
General information
Type description
Dimensions (W x D x H)
Weight
Cooling
Ambient temperature*
Relative air humidity*
Air pressure*
Transport and storage
Temperature
Rel. air humidity
Air pressure
Contamination level
IP-Protection class
Electrical information
Operating voltage, frequency
Nominal voltage device
Rated current device
Power consumption, max.
Protection class power supply
Protection class light source
Overvoltage category
Diodes
Average LED lifetime LED
100% setting
* Test conditions of DIN EN 61010-1 and UL61010-1 standards
Values
KL 2500 LED
mm approx. 231 x 114 x 137
kg approx. 2.45
Axial fan
°C + 5 ... + 40
% Up to 31°C ambient temperature: 85%
From 31°C to 40°C ambient temperature:
decreasing linearly to 75%
hPa 800 ... 1060
°C -20 ... +70
% 10 ... 95 (non-condensing)
hPa 500 ... 1200
2
IP20
100 – 240 V ~
50/60 Hz
V 24, DC
A 3.3
VA max. 80
I
III
II
High Power LED
h 50,000 (luminous flux reduced to 70%)
11/12