Setting The Amount Of Rinse Aid; Switching Rinse Aid System Off - Bosch SM Series User Manual

en Rinse aid system
Adding rinse aid
If the display shows "Please add
rinse aid. ", add rinse aid. Only use
rinse aid for domestic dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it
3.
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
Close the lid of the dispenser for
4.
rinse aid.
a The lid clicks into position.
34
and lift ⁠ .
2
1
max
Setting the amount of rinse
aid
If there are streaks or water marks on
tableware, change the amount of
rinse aid.
To open the basic settings, press
1.
for approx. 3 seconds.
Press repeatedly until the display
2.
shows "Rinse aid dispenser".
Press or
3.
right amount of rinse aid has been
set.
The value 5 is set at the factory.
– A low setting adds less rinse aid
during the wash cycle and re-
duces streaking on tableware.
– A higher setting adds more
rinse aid during the wash cycle,
reduces water marks and im-
proves the drying result.
To save the settings, press
4.
approx. 3 seconds.

Switching rinse aid system off

If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.
Tip: The function of rinse aid is lim-
ited with combined detergents. You
will generally get better results using
rinse aid.
To open the basic settings, press
1.
for approx. 3 seconds.
Press repeatedly until the display
2.
shows "Rinse aid dispenser".
Press or
3.
display shows the amount of rinse
aid as 0.
repeatedly until the
repeatedly until the
for