Washing Results - Bosch SM Series User Manual

en Troubleshooting
Errors
E:25 lights up.
E:27 lights up.
Another error code appears
on the display.
E:01 to E:30

Washing results

Errors
Tableware is not dry.
54
Cause
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Mains voltage is too low.
A technical fault is present.
Cause
No rinse aid used or dosage
set too low.
Selected programme has no
drying phase
Water collects in recesses of
the tableware or cutlery.
Troubleshooting
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 64
Secure the cover of the Wastewater
▶
pump → Page 64 so it clicks into
position.
This is not a fault on the appliance.
Contact an electrician.
1.
Have the mains voltage and elec-
2.
trical installation checked by an
electrician.
Press .
1.
Unplug the appliance or switch off
2.
the fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the appli-
4.
ance in a socket or switch on the
fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press ⁠ .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact Customer Service
‒
→ Page 65 and give the er-
ror code.
Troubleshooting
Add Rinse aid → Page 33.
1.
Set the amount of rinse aid to be
2.
dispensed.
→ "Setting the amount of rinse aid",
Page 34
Select a programme with drying.
▶
Position tableware at an angle
▶
where possible.