Home Connect Problem; Information On Display Panel - Bosch SM Series User Manual

Home Connect problem

Errors
Connection to home net-
work is not established.
WLAN display is flashing.
Home Connect cannot be
implemented correctly.
Energy manager does not
connect to the energy man-
ager of the home system.

Information on display panel

Errors
Special salt refill indicator
lights up.
Refill indicator for special
salt does not light up.
Refill indicator for rinse aid
lights up.
Refill indicator for rinse aid
does not light up.
Machine Care indicator
lights up.
Cause
WLAN on router is not act-
ive.
Connection to home net-
work is not available.
Home Connect set incor-
rectly.
Technical fault is present.
Connection to the energy
manager of the home sys-
tem is not available.
Cause
Insufficient special salt.
Sensor does not detect spe-
cial salt tablets.
Water softening system is
switched off.
Insufficient rinse aid.
Rinse aid system is switched
off.
Machine care is recommen-
ded.
Troubleshooting en
Troubleshooting
Check the wireless network con-
▶
nection of your router.
Activate the wireless network con-
▶
nection on your router.
Please consult the documents sup-
▶
plied for Home Connect.
Please consult the information
▶
about support in the documents
supplied for Home Connect.
Please consult the instruction
▶
manual of the energy manager
manufacturer of your home system.
Troubleshooting
Add Special salt → Page 32.
▶
Do not use special salt tablets.
▶
Setting water softening system
▶
→ Page 31
Add Rinse aid → Page 33.
1.
Set the amount of rinse aid to be
2.
dispensed.
→ "Setting the amount of rinse aid",
Page 34
→ "Setting the amount of rinse aid",
▶
Page 34
Run the Machine Care programme
▶
without tableware.
Use a special machine care
‒
product.
The indicator will go out automatic-
ally after 3 wash cycles whether
Machine Care is carried out or not.
61