Setup Field(S) - Symbol DS 3408 Product Reference Manual

15-30 DS 3408 Product Reference Guide
Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Table 15-1. Setup Field(s) Definitions
Description
Scan the Move Cursor To Character
then any printable ASCII character from the
Keyboard. When this is used, the cursor moves to the position
after the matching character. If the character is not there, the rule
fails and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This parameter moves the cursor past all sequential occurrences
of a selected character. For example, if the selected character is
'A', then the cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Move Cursor Past Character
select a character from the Alphanumeric
character is not there, the cursor does not move (i.e., has no
effect).
Scan one of these bar codes to select the number of positions
ahead to move the cursor.
Scan one of these bar codes to select the number of positions
back to move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code.
These values must be set using the prefix/suffix values in
7-4 on page 7-21.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Send Next 20 Characters
bar code on page 15-31, 15-31
Alphanumeric
15-31
15-31
bar code on page 15-31, then
Keyboard. If the
15-32
15-33
15-35
Table
Page