Table of Contents
Advertisement
Beeper Sequence
Hi/Hi beeps
Hi/Lo/Hi/Lo beeps
Hi/Lo/Lo beeps
Low beep
Lo/Hi/Hi beeps
ADF Programming: Error Indications. Duration of tones are very long.
Lo/Hi/Lo/Hi beeps
Lo/Hi/Lo beeps
Lo/Hi beeps
Host Specific
USB only
4 short high beeps
Short low/short medium/short high
beep sequence after scanning a USB
device type
Short low/short medium/short high
beep sequence occurs more than once
RS-232 only
1 short high beep
LED Definitions
In addition to beep sequences, the digital scanner uses a two-color LED to indicate status.
during scanning.
LED
Off
Green
Red
Table 2-1. Beeper Definitions (Continued)
Enter another criterion or action, or scan the Save Rule bar code.
Rule saved. Rule entry mode exited.
All criteria or actions cleared for current rule, continue entering rule.
Delete last saved rule. The current rule is left intact.
All rules are deleted.
Out of rule memory. Erase some existing rules, then try to save rule again. (It is not necessary to re-enter the current
rule.)
Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit rule entry.
Entry error, wrong bar code scanned. Re-enter criterion or action. All previously entered criteria and actions are
retained. Criteria or action list is too long for a rule.
Digital scanner has not completed initialization. Wait several seconds and scan again.
Communication with the bus must be established before the digital scanner can operate at the highest power level.
The USB bus can put the digital scanner in a state where power to the digital scanner is cycled on and off more than
once. This is normal and usually happens when the PC cold boots.
A <BEL> character is received and Beep on <BEL> is enabled.
Table 2-2. Standard LED Definitions
No power is applied to the digital scanner, or the digital scanner is on and ready to scan.
A bar code was successfully decoded.
A data transmission error or digital scanner malfunction occurred.
Indication
Table 2-2
defines LED colors that display
Indication
Scanning 2-5
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
