User Preferences Parameter Defaults - Symbol DS 3408 Product Reference Manual

4-4 DS 3408 Product Reference Guide

User Preferences Parameter Defaults

Table 4-1 lists defaults for user preferences parameters. To change any option, scan the appropriate bar code(s) provided in the User
Preferences section beginning on page 4-5.
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Note
User Preferences
Set Default Parameter
Parameter Scanning
Beeper Tone
Beeper Volume
Power Mode
Time Delay to Low Power Mode
Trigger Mode
Decode Session Timeout
Timeout Between Decodes, Same Symbol
Beep After Good Decode
Scanstand Session Timeout
for all user preferences, hosts, symbologies, and
Table 4-1. User Preferences Default Table
Parameter
Parameter
Number Default
All Defaults
ECh Enable
91h Medium
8Ch High
80h Continuous On
92h 5 Minutes
8Ah Level
88h 9.9 Sec
89h 0.6 Sec
38h Enable
F0h, 90h 2 Seconds
Page
Number
4-5
4-5
4-6
4-7
4-7
4-8
4-9
4-10
4-10
4-11
4-11