Operation And Functions - auna RCD-70 DAB Manual

EN
26

OPERATION AND FUNCTIONS

Power
1 Connect the power cord to the AC socket (20) of the device.
2 Connect the plug of the power cord to a wall socket.
• To completely disconnect the device from power, remove the plug of
the power cord from the wall socket or remove the batteries.
• For battery power, this unit requires 6 x C size batteries (not included).
• The device is powered and in standby mode when you see the display is
switched on.
• Press the On/Off button (5) in standby mode to turn the device on.
• Press the On/Off button (5) again turn the device off to the standby
mode.
Using the Antenna to improve Signal Reception
• Extend the antenna and adjust the position of the antenna for the best
reception
Volume Control
• Adjust the volume level by the volume knob.
Headphone Jack
• Once connecting to the 3,5mm headphone jack, then the sound will be
cut off from speaker (12/13) automatically.
Setting the Clock
• The date and time of the radio is automatically set once it receives DAB/
DAB+ radio broadcast signals (and when such info is available).
• You may also set the date and time manually:
1 Press the Mode button (4) in standby mode.
2 Press the Skip(+/-) button (8/7) or rotate the Scroll+/- knob (11) to
choose the time, then press the Enter button (11) to save.
3 Press Skip(+/-) button (8/7) or rotate the Scroll(+/-) knob (11) to choose
the date, then press the Enter button (11) to save.