Music Player Operation - auna iTuner 320 BT Manual

MUSIC PLAYER OPERATION

The built-in Music Player allows you to play unprotected audio files stored
on a connected USB mass storage device via the device. Press MODE
button on unit or remote control to access Mode Menu. Turn the
SCROLL&SELECT dial on unit or press
control to select Music Player mode, then press SCROLL&SELECT dial on
unit or SELECT button on remote control to confirm.
USB Playback
When a USB device is connected to the unit under Music Player mode, the
display shows "USB disk attached – Open folder?", press SELECT button to
confirm [YES].
Alternatively,
• During Music Player mode, press the
playback and press the SELECT button to confirm.
• Press the
confirm a song file.
The unit may not be compatible with all USB devices; this is not an
indication of a problem with the unit.
Playing Music via Music Player
⏯
1. Press button on the unit or on the remote control to play/pause music.
⏮ ⏭
2. Press / buttons on unit or remote control to skip to the previous/
next track.
My playlist
1. Under menu of Music Player mode, press
My playlist and press the SELECT button to confirm.
2. Press buttons to select songs and press SELECT button to
start playing through the playlist.
Saving songs into My playlist
• To store a song into My playlist, you must first be listening to the song
that you would like to save.
• Press and hold the SELECT button to save.
Repeat Mode
1. Under menu of Music Player mode, press the
select Repeat play and press SELECT button repeatedly to turn repeat
play on/off. A corresponding Repeat symbol appears in the status bar.
2. Alternatively, press REPEAT button on remote control repeatedly to turn
mode on/off.
buttons to select and press SELECT button to
buttons on remote
buttons to select USB
buttons to select
buttons to
EN
USB playback
USB disk attached -
Open folder?
YES NO
59