General Functions - auna Weimar 10026418 Instructions Manual

2. Connect power adapter to mains socket, press
3. Press MODE button repeatedly to select Auxiliary Input mode.
4. In Aux in mode, you may operate your audio device directly for playback features.
5. To gain optimal volume levels, adjusting the output volume level on the audio device as well is
recommended.
Note: the unit will automatically switch to standby mode after 30 minutes if the source device is disconnect,
switch off or the volume is too close to mute.
Setting Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press MENU button > Main menu > Sleep, and then press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to view options Sleep OFF, 15, 30, 45 or 60 MINS, press SCROLL/
SELECT knob to confirm. The sleep icon
3. To turn the sleep function off while the sleep timer is still counting down, select ‚Sleep' option,
turn SCROLL/SELECT knob to select ‚Sleep OFF'.
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1. Press MENU button > Main menu > Alarms, and then press SCROLL/SELECT knob to confirm.
2. Turn SCROLL/SELECT knob to select 'Alarm 1' or 'Alarm 2', and then press SCROLL/SELECT knob
to confirm.
3. Turn SCROLL/SELECT knob to select options, and then press SCROLL/SELECT knob to confirm the
setting.
Alarm active day: Off, Daily, Once, Weekends or Weekdays
Enable:
Alarm time: 00:00 (manually set up the time )
Time:
Alarm mode: Buzz, Internet radio, DAB or FM
Mode:
Last listened or saved preset station (not available for Buzz mode).
Preset:
Alarm volume
Volume:
Save: Save the alarm
4. When the display shows ‚Alarm Saved', the alarm setting is successful.
display.
5. To temporarily switch off alarm, press SCROLL/SELECT knob to activate Snooze function when the
alarm sounds. Press SCROLL/SELECT knob repeatedly can set Snooze time of 5, 10, 15 or 30
minutes in turn. The set snooze time will show on the display.
6. To turn off alarm, press
7. To cancel Alarm, refer to steps1-3 to enable alarm 'Off'.
Equalizer
This feature enables you to choose a sound equalization profile. Each of the equalization setting will
change the tone of the sound from your radio when selected.
1. Press MENU button > Main menu > System settings > Equaliser, and then press SCROLL/SELECT
knob to confirm.
m u l t i m e d i a

General Functions

and sleep time will show on the display.
button when the alarm sounds.
button to switch unit on.
http://www.auna-multimedia.com
or will show on the
24