Fm Operation; Dab Operation - auna Elton Instructions Manual

FM OPERATION

1. Turn on the system and set the volume to a low level. Press the
FUNCTION button (FUNC. on the remote control) to enter into FM
mode.
2. Connect the FM/DAB antenna onto the 75-ohm socket at the back of
the unit, press and hold the SCAN button to start auto-search forwards.
Rotate the SCROLL knob on the unit or press TUNER/SCROLL
button on the remote control.
3. If you tune to a weaker FM station, the reception will automatically
switch to mono. You may press SCROLL/ENTER on unit or ENTER on
remote control to change Stereo or Mono mode.
4. During FM working mode, press INFO button to see the following
information on the screen: Auto(stereo/mono), Radio Text, Program
Type, Signal Strength, Time/Date and Frequency.
When 'Strong stations only' shown on the display, the FM search is
stopping only on strong stations.

DAB OPERATION

1. Connect the FM / DAB antenna at the back of the unit.
2. Turn the system 'on' and set the volume to a low level. Press the
FUNCTION button to enter into DAB mode.
3. The unit will scan the DAB station automatically till receive the DAB
station, and store all the received DAB stations in the preset memory
automatically. Once the auto-scan has been completed, rotate the
SCROLL knob on the unit or the TUNER/SCROLL
remote control to choose the DAB stations. If you tune to a DAB stereo
station, the 'stereo' will show on the screen.
4. During DAB playing mode, press INFO button on the main unit to see
the information of the playing DAB station on the screen, i.e. Program
Type, Ensemble Information, Transponder, Audio Bit-Rate, Signal-
Strength, Time/Date, DLS Information.
DAB manual tuning
1. Turn the system 'on' and press FUNCTION button to enter into DAB
mode.
2. Press and hold the SCROLL/ENTER button, 'Manual tune' will show on
the display.
3. Turn the SCROLL knob on the main unit or the TUNER/SCROLL
∧ ∨
/
∧ ∨
/
button on the
∧ ∨
/
EN
35