CONNECTING TO A STEREO AMPLIFIER / RECEIVER EQUIPPED
Use an audio coaxial digital cable available at retail stores for the audio connection.
Amplifier / receiver equipped with digital
input jacks
NOTES:
•
A 5.1 channel Dolby Digital surround format cannot be recorded as digital sound.
•
Be sure to turn off the power to all components in the system before connecting them together.
•
Refer to the Owner's Manuals for the components to be connected to the unit.
•
Set Dolby Digital to OFF for audio output in the setup mode when using this digital audio connection.
Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
•
This will allow 2 channel DVD sound to be listened to on the amplifier/receiver.
WITH DIGITAL INPUT JACKS
To COAXIAL DIGITAL
AUDIO INPUT jack
- 13 -
DIGITAL AUDIO OUT COAXIAL
NOTE: DVD, CD, MP3 audio only
[Fig. 6]
EN
1C29