Connecting To A Stereo System; Connecting To A Stereo Amplifier Equipped With Digi- Tal Input Jacks Such As Md Deck Or Dat Deck (For Dvd) - Sylvania 6719DD Owner's Manual

Stereo system
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for your stereo system and any other components to be connected to the
TV/DVD/VCR.
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGI-
TAL INPUT JACKS SUCH AS MD DECK OR DAT DECK (for DVD)
Use an audio coaxial digital cable available at retail for the audio connections.
Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VCR.
•
Set Dolby Digital to OFF for audio output in the setup mode. Playing a TV/DVD/VCR using incorrect set-
tings may generate noise distortion, and may also damage the speakers.

CONNECTING TO A STEREO SYSTEM

ANT.
To ANALOG AUDIO INPUT jacks
ANT.
To COAXIAL DIGITAL
AUDIO INPUT jack
- 13 -
1
L
AUDIO OUT
R
COAXIAL
To Right (red) and Left (white)
AUDIO OUT jacks
[Fig. 6]
1
L
AUDIO OUT
R
COAXIAL
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 7]
EN
1C29