Connecting To Front A/Vinput Jacks; Installing The Batteries - Sylvania SRCD427P Owner's Manual

TO RECORD A SCRAMBLED/UNSCRAM-
BLED CHANNEL
1. Set the unit channel selector to the output channel
of the Cable Converter Box or Satellite Box. (Ex.
CH3)
2.Select the channel to record with your Cable
Converter Box or Satellite Box.
Note to CATV system installer:
This reminder is provided to call the CATV sys-
tem installer's attention to Article 820-40 of the
NEC that provides guidelines for proper ground-
ing and in particular, specifies that the cable
ground shall be connected to the grounding sys-
tem of the building as close to the point of cable
entry as practical.
CONNECTING TO FRONT A/V
INPUT JACKS
When you watch a program recorded on an another
source (VCR, video camera, video game system), use
the audio/video input jacks on the front of the unit.
Connect the audio/video output jacks of another
source to the AUDIO L/R and VIDEO jacks of this
unit.
Then press the CHANNEL button K or L until
"AUX" appears on the TV screen.
NOTE:
•
When you connect a monaural VCR (another
source) to this unit, connect the Audio output jack
of the monaural VCR (another source) to the
AUDIO L jack of this unit. The audio will output
in both L and R channel equally.
To the audio
output jacks
[Another source]
Audio/Video
cables
(not supplied)
etc.
To the video
output jack
1)Open the battery compartment cover by pressing
2)Insert 2 "AA" penlight batteries into the battery
3)Replace the cover.
HEADPHONE VIDEO L AUDIO R
[Front of the
TV/VCR/DVD]
[Fig. 5]
- 12 -

INSTALLING THE BATTERIES

the cover on the remote unit in the direction of the
arrow.
compartment in the direction indicated by the
polarity (+/-) markings.
EN
1C29