Table of Contents
Advertisement
CONNECTING TO FRONT A/V INPUT JACKS
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO
jacks of this unit.
Then press [SELECT] or [CH. K K / L L ] until "AUX" appears on the screen.
ex.
VCR or video camera, etc.
NOTE:
•
When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the
monaural VCR (another source) to the AUDIO L jack of this unit. The audio will output in both L and R
channel equally.
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH
Use an audio coaxial digital cable (commercially available) for the audio connections.
Connect to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.
ex.
MD deck, DAT deck, etc.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the unit.
•
Set "DOLBY DIGITAL" to "PCM" for audio output in the setup mode. Playing a unit using incorrect set-
tings may generate noise distortion and may also damage the speakers. (Refer to page 44.)
To the Audio output jacks
Audio Cable
(commercially available)
(OUT)
To the Video output jack
Video Cable
(OUT)
(commercially available)
DIGITAL INPUT JACKS (for DVD)
To Coaxial digital
Audio input jack
(IN)
POWER
SELECT
VOLUME
SKIP
PLAY
SKIP
STOP
OPEN/CLOSE
CHANNEL
DVD
TV/VCR
SEARCH
ANT.
Audio coaxial digital cable
(commercially available)
- 13 -
REC/OTR
REW
PLAY
F.FWD
STOP/EJECT
HEADPHONE
VIDEO
AUDIO
L
R
(IN)
AUDIO
HEADPHONE
VIDEO
L
R
[Front of the unit]
(IN)
AUDIO OUT
COAXIAL
To AUDIO OUT
COAXIAL jack
(Only DVD AUDIO OUT)
AUX
[Fig. 5]
(OUT)
[Fig. 6]
EN
Advertisement
Table of Contents
