C Tv Operation; Watching A Tv Program; Degaussing; Picture Control - Sylvania SRCD427P Owner's Manual

WATCHING A TV PROGRAM

1
Turn on the unit
Press the POWER button to turn on the unit.
2
Select the channel number
Press the CHANNEL button K or L to select your
desired channel number or press the number on the
remote control.
Note for using the Number button on the remote
control:
¡ You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
¡ When selecting cable channels which are higher
than 99, press +100 first, then press the last two
digits. (Example: to select channel 125, first press
"+100" then press "2" and "5").
Remember: If the unit is connected to a cable box or
satellite box, it must be on CH3 or CH4, then the
channel to be viewed must be selected on the cable
box or satellite box.
3
Adjust sound
Press the VOLUME button X X or Y Y
to adjust the volume.
NOTES:
•
If you press the CHANNEL button K or L in the
DVD mode, you can change the TV channels.
Even if you turn off the unit in the DVD mode,
when you turn it on again, it will go into the
TV/VCR mode.

DEGAUSSING

Magnetism from nearby appliances and unshielded
speaker systems might affect the color of the TV pic-
ture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, unplug the power
cord, then plug it in again 30 minutes later.
TV OPERATION
TV/VCR
The unit's picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for your individual preference.
NOTES:
•
Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
•
When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•
The unit is turned on.
1
Select "PICTURE CONTROL"
Press the PICTURE button on the remote control.
2
Select item you want to adjust
Press the Arrow button K or L until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
VOLUME 20
C C C C C
C C C C C C C
3
Adjust the picture control
Press the Arrow button s or B to adjust to your
desired level.
BRIGHT
CONTRAST
COLOR
TV/VCR
TINT
SHAPNESS
•
If there is a power failure of any kind, the unit will
remember the setting.
- 19 -

PICTURE CONTROL

Arrow Button {
to decrease
brightness
to decrease
contrast
to pale
to purple
to soft
TV/VCR
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
Arrow Button B
to increase
brightness
to increase
contrast
to brilliant
to green
to clear
EN
1C29