Machine Features; Operation; Settings - Festool Cleantec Series Original Operating Manual

as well as for heavy-duty applications and industrial
use in accordance with IEC 60335-1 and IEC 60335-2-
69.
The user is liable for improper or non-intend-
ed use.
5

Machine features

[1-1] Sealing plug (only CTM 48 E LE EC)
[1-2] Intake opening
[1-3] Compressed air connection
[1-4] Connection for energy box
[1-5] Handle
[1-6] SysDoc
[1-7] Handle SB-CT (accessory)
[1-8] Hose diameter setting (only CTM 48 E LE
EC)
[1-9] Switch
[1-10] Suction power adjuster
[1-11] Appliance socket with automatic on/off
function
[1-12] Locking clip
[1-13] Dust container
[1-15] Brake
6

Operation

WARNING
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
6.1 Initial operation

Open the locking clips [2-2] and remove the top
section of the machine [2-1].

Remove the accessories from the dust container
[2-3] and the packaging!

Insert a filter bag in the dust container that fulfils
statutory requirements (see chapter 7.8).

Replace the top section [2-1] and close the lock-
ing clips [2-2].

Attach the cable holder to the rear of the mobile
dust extractor (see Fig. [3]).
CTM 48 E LE EC, CTL 48 E LE EC

Only CTM 48 E LE EC: Insert the sealing plug [1-
1] on the panel (see Fig. [1] ).

Connect the suction hose to the machine.
6.2 Switch on/off

Insert the plug into an earthed socket.
CAUTION
Risk of injury from tools starting up unexpectedly

Before setting the switch to the "AUTO" or
"MAN" position, make sure that the connected
tool is switched off.
The switch [1-9] serves as an on/off switch.
Switch position "0"
Appliance socket [1-11] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket [1-11] is connected to the power,
the mobile dust extractor starts.
"Auto" switch position
Appliance socket [1-11] is connected to the power,
the mobile dust extractor starts when the connected
tool is switched on.
7

Settings

7.1 Adjusting the hose diameter (only CTM 48
E LE EC)

Adjust the hose diameter adjuster [1-8] to match
the diameter of the connected hose.
 The monitoring devices will measure the air
speed in the extractor hose correctly as a result
(see chapter 7.9).
7.2 Connecting electric power tools
WARNING
Risk of injury

Observe the maximum appliance socket con-
nected load (see chapter "Technical data")

Switch off the electric power tool.

Connect the electric power tool to the appliance
socket [1-11].
7.3 Connecting pneumatic tools
WARNING
Risk of injury

Switch off the air tool.
GB
15