Intended Use; Machine Features; Operation - Festool CTH 26 E/a Original Instructions Manual

4

Intended use

The mobile dust extractor is suitable for the ab­
sorption and suction of dust which is hazardous
to health with limit values corresponding to
dust class 'H' in accordance with EN
60335-2-69, including wood and paint dust.
The mobile dust extractor is suitable for the ab­
sorption and suction of dust with carcinogenic
and pathogenic particles, as well as asbestos
dust.
The mobile dust extractor is designed to absorb
water.
The mobile dust extractor is, in accordance with
EN 60335-1 and EN 60335-2-69, suitable for in­
creased demands for commercial use.
The user is liable for improper or non-in­
tended use.
5

Machine features

The specified illustrations appear at the begin­
ning of the Operating Instructions.
[1-1] Sealing plug
[1-2]
Intake opening
[1-3] Module slot
[1-4]
Appliance socket
[1-5] Hose store
[1-6]
Handle
[1-7] SysDoc
[1-8] Hose diameter setting
[1-9] Suction power adjuster
[1-10] Switch
[1-11]
Warning sticker
[1-12] Locking clip
[4] EN 60335‑2‑69: dust class
FIS-CTH (3 x) (L, M, H
HF‑CT H
NF‑CT
CTH 26 E
497541
)
[4]
498995
496169
[1-13]
Dust container
[1-15] Brake
6

Operation

Unauthorised voltage or frequency!
Risk of accident
► The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
6.1 Initial commissioning
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Remove the accessories from the dirt
trap [2-3] and the packaging!
► Cover the text field of the warning
sign [1-11] with the supplied adhesive label
in your country's language.
► Insert the plug [1-1] at the cover plate (see
figure [1a]).
► Place a filter bag or safety filter bag in the
dirt trap in line with legal requirements (see
section 7.7 , 7.8
► Replace the top section [2-1] and close the
locking clips [2-2].
► Attach the cord holder to the reverse of the
mobile dust extractor (see figure [3]).
► Connect the suction hose to the machine.
6.2 Switching on/off
► Insert the mains plug into an earthed sock­
et.
CTH 48 E
497542
498995
496169
WARNING
).
English
17