LaserLiner PowerPlane-Laser 3D Manual page 11

2
Alignment edge
Plug-on alignment edge (5)
for front and lateral alignment
3
Horizontal and vertical levelling
Release the transport restraint, set slide switch to "ON".
The horizontal laser line appears. The laser lines can be switched
on individually with the selection button.
LASER
The transport restraint must be released for horizontal and vertical
!
levelling. The laser lines flash and a signal sounds as soon as the
device is outside the automatic levelling range of 2.5°. Position
the device such that it is within the levelling range.
LASER LASER
PowerPlane-Laser 3D
LASER
11
EN