Feature - Epson TM-T20III Technical Reference Manual

Item/Method
Cut error release method
Auto top logo printing
Auto bottom logo printing
Extended settings for auto top logo/bottom logo printing

Feature

Automatic line feed
• Always disabled (default setting)
• Always enabled
When set to "Always enabled", paper is fed by one line after data in the print buffer is printed.
USB power-saving function
• Disabled
• Enabled (default setting)
The USB power-saving function is valid only when the USB interface communication condition is
set to the vendor-defined class and the system configuration is set so that the USB driver can
support the USB power-saving function.
Paper sensors to output paper end signal
• Enables both the roll paper end sensor and the roll paper near-end sensor (default setting)
• Disables both of the sensors
Error signal output
• Enabled (default setting)
• Disabled
This model does not support this setting.
Data processing with reception error
• Prints "?" (default setting)
• Ignored
Software Setting Mode
Chapter 3 Advanced Usage
Epson TM-T20III Utility
✔
✔
✔
✔
42