Installing the Printer
You can install the printer horizontally on a flat surface (with the paper exit on top) or vertically (with the paper
exit at the front). Also, you can hang it on a wall using the included accessories.
Horizontal installation
Installing the Printer Vertically
When installing the printer vertically, attach the four rubber feet in the rectangular indents in the printer case,
as shown in the illustration below.
Vertical installation
• Do not place the printer in a dusty location.
• Do not knock or strike the printer. This may cause defective print.
• Do not catch cables or place foreign matter under the printer.
• Take measures to prevent the printer from moving by vibration during paper cutting and when
using a drawer. Affixing tape (Model: DF-10) is provided as an option.
Rubber feet
Chapter 2 Setup
Hanging on a wall
24