Page 1
DJ MIXER DJM-250MK2 Firmware Update Guide...
Page 2
1. Connect DJM-250MK2 to your computer using a USB cable. 2. Launch the Settings Utility. For Windows: [Start] menu > [All Programs] > [Pioneer] -> [DJM-250MK2] -> [DJM-250MK2 Settings Utility] For Mac OS: [Application] > [Pioneer] > [DJM-250MK2] > [DJM-250MK2 Settings Utility] 3.
Page 3
B. Check the downloaded file 1. Unzip the downloaded file. For Windows: Save the downloaded file [DJM-250MK2_vxxx_Win.zip] to an arbitrary directory such as desk top and unzip it. For Mac OS: Save the downloaded file [DJM-250MK2_vxxx_Mac.dmg] to an arbitrary directory such as desk top and double click to mount it.
Page 4
C. Preparation for updating DJM-250MK2 1. Connect DJM-250MK2 and a computer. Connect DJM-250MK2 to your computer using a USB cable. 2. Start the update mode. Press the power button while pressing the [FILTER] button and the [CH1 CUE] button. When the update mode started, 12dB on the MASTER level indicator starts blinking.
Page 5
<STEP3> After ensuring the firmware version, click on the [Start] button. Ensure that the power cable and the USB cable are securely connected to the DJM-250MK2 during the update. Please make sure to use an AC adaptor to power your laptop during updating the firmware.
Check the firmware version of the DJM-250MK2 as described in [A. How to check the current Firmware Version of DJM-250MK2]. The firmware update is successfully completed when you find the version you wanted in the Settings Utility. If not, turn off the power of the DJM-250MK2 and try [D. Updating the firmware using a computer] again.
Tips: How to cope with abnormal termination If you fail to update and the following message appears, turn off the power of the DJM-250MK2 and start from the beginning of the above Updating Procedures. Tips: When [Your DJM-250MK2 is not recognized] is shown hen the following message appears after selecting a language, please follow the instructions in the message.