Compaq SLT 386s/20 Maintenance And Service Manual page 34

RAM diagnostics failed
1719 - 57 Fixed disk drive controller
to drive test failed
1719 - 58 Failed to write sector buffer
1719 - 59 Failed to read sector buffer
1719 - 60 Failed to compare sector buffer
------------------------------------------------------------------------------
Error
Code Description
------------------------------------------------------------------------------
1719 - 61 Failed uncorrectable
ECC error
1719 - 62 Failed correctable ECC error
1719 - 63 Failed soft error rate
1719 - 65 Exceeded maximum bad sector
per track
1719 - 66 Failed initial drive parameter
1719 - 67 Failed to write long
1719 - 68 Failed to read long
1719 - 69 Failed to read drive size from
controller
1719 - 70 Failed translate mode
1719 - 71 Failed nontranslated mode
1719 - 72 Bad track limit exceeded
1719 - 73 Previously exceeded bad track limit
1719 - 74 Failed sleep mode
1719 - 75 Failed idle mode
1719 - 76 Failed standby mode
1719 - 77 Failed to change mode
1719 - 78 Exceeded spinup time limit
==============================================================================
Table 3-10. Tape Drive Test Error Codes
==============================================================================
Recommended Action
The following steps apply to error
codes 1700 - xx through 1799 - xx:
1. Replace the fixed disk drive
signal and power cables and
retest.
2. Replace the fixed disk drive and
retest.
3. Replace the system board and
retest.