Compaq SLT 386s/20 Maintenance And Service Manual page 26

403 - 01 Printer pattern test failed
498 - 00 Printer failed or not connected
==============================================================================
Table 3-6. Diskette Drive Test Error Codes
==============================================================================
Error
Code Description
------------------------------------------------------------------------------
600 - xx Diskette ID drive types
test failed
601 - xx Diskette format failed
602 - xx Diskette read test failed
603 - xx Diskette write, read, compare
test failed
604 - xx Diskette random seek test
failed
605 - xx Diskette ID media failed
606 - xx Diskette speed test failed
607 - xx Diskette wrap test failed
608 - xx Diskette write protect test
failed
609 - xx Diskette reset controller
test failed
------------------------------------------------------------------------------
Error
Code Description
------------------------------------------------------------------------------
610 - xx Diskette change line test
failed
610 - 01 Exceeded maximum soft error
limit
610 - 02 Exceeded maximum hard error
limit
610 - 03 Previously exceeded maximum
soft error limit
610 - 04 Previously exceeded maximum
hard error limit
610 - 05 Failed to reset controller
Recommended Action
The following steps apply to error
codes 600 - xx through 610 - xx:
1. Replace the diskette and retest.
2. Check and/or replace the power
and signal cables and retest.
3. Replace the diskette drive and
retest.
4. Replace the system board and
retest.
Recommended Action
The following steps apply to error
codes 600 - xx through 610 - xx:
1. Replace the diskette and retest.
2. Check and/or replace the power
and signal cables and retest.
3. Replace the diskette drive and
retest.
4. Replace the system board and
retest.