Related Manuals for Abus wAppLoxx Pro Series
Summary of Contents for Abus wAppLoxx Pro Series
- Page 1 Installation and operating instructions wAppLoxx Pro WLX Pro Access and Intrusion WLX Pro Oval WLX Pro Rokoko wAppLoxx Pro oval – installation instructions...
-
Page 2: Table Of Contents
Contents General ..............................3 Technical data ............................5 Installing the wAppLoxx Pro Cylinder ...................... 6 wAppLoxx Pro oval cylinder individual parts ..................6 Operating the wAppLoxx Pro, reader outside ..................7 Operating the wAppLoxx Pro Rokoko ....................9 Logging the wAppLoxx Pro Cylinder into and out of the wAppLoxx Control ........12 Operating the wAppLoxx Pro Cylinder .................... -
Page 3: General
ABUS Security-Center GmbH & Co. KG shall not be held liable for loss or damage caused – or alleged to have been caused – either directly or indirectly by this manual. We reserve the right to make changes to this manual without prior notice. - Page 4 Information on the battery: The wAppLoxx Pro Cylinder is powered with direct current via a 3 V CR2 lithium battery that is included in the scope of delivery. In order to ensure a long lifespan and to prevent fire and injury, comply with the following instructions: •...
-
Page 5: Technical Data
WLX Pro Nordic Rokoko Scope of delivery: Double knob cylinder, quick guide, 3 V CR2 lithium battery, forend screw Required accessories: ABUS Mifare DESfire EV1 Tag, WLX Pro Tool Set, small (battery replacement) Optional accessories: WLX card reader Tags: ABUS Mifare DESfire EV1 Tag... -
Page 6: Installing The Wapploxx Pro Cylinder
Installing the wAppLoxx Pro Cylinder wAppLoxx Pro oval cylinder individual parts 1. Outer cap 2. WLX Pro cylinder body oval 3. Battery 4. Mounting plate 5. Basket 6. PCB bracket 7. Electronic screws Tools required (must be ordered separately): a. Outer cap opening key wAppLoxx Pro oval –... -
Page 7: Operating The Wapploxx Pro, Reader Outside
Operating the wAppLoxx Pro, reader outside Removing the outer cap 1 The outer cap (1) has to be removed in order to insert the battery (3). Using the opening key (a), fix the mounting plate (4) onto its notch and unscrew the outer cap (1). - Page 8 Inserting the battery Make sure that the battery (2) is placed on the white battery flag. When inserting the battery, ensure the polarity is correct (positive terminal facing antenna circuit board). Installing the outer cap Screw the outer cap (1) back on by securing the mounting plate using the opening key (e).
-
Page 9: Operating The Wapploxx Pro Rokoko
Operating the wAppLoxx Pro Rokoko Removing the outer knob 1 The entire outer knob (1+5+6) must be removed in order to insert the wAppLoxx Pro into the lock from the inside. Firstly, remove the outer cap (1) Removing the electronic knob 1 After removing the outer cap, the electronic knob (5+6) must be removed. - Page 10 Installing the basket When the cylinder body has been installed in the lock, secure the basket (5) to the shaft (7) using 6 screws. During installation, make sure that the mounting plate (4) between the basket (5) and the shaft is inserted in the correct order.
- Page 11 Installing the outer cap Screw the outer cap (1) back on by securing the mounting plate (4) using the opening key (e). There is a marking on the outer cap (1) that makes it easier to position the outer cap correctly on the groove of the knob (3).
-
Page 12: Logging The Wapploxx Pro Cylinder Into And Out Of The Wapploxx Control
Logging the wAppLoxx Pro Cylinder into and out of the wAppLoxx Control Logging a wAppLoxx Pro Cylinder in: Create a new wAppLoxx Cylinder via the wAppLoxx Control Pro user interface and click on “Register” – for more information, please see the user guide of the wAppLoxx Control Pro. Now hold the wAppLoxx Pro System Card in front of the cylinder to be registered. -
Page 13: Operating The Wapploxx Pro Cylinder
When the cylinder has recognised the reset card, it will flash green briefly. 1 × green Once the cylinder has been successfully logged out, the cylinder will light up green and return to its original 1 × green state. Both cards are included in the scope of delivery of the wAppLoxx Pro Control Operating the wAppLoxx Pro Cylinder A brief green flash signals that the tag is being read and sent. - Page 14 Disarming: 1. Present a valid tag to the reader. 2. After presenting the tag: 1 × green flash. 1 × green 3. Remove tag. The system is coupled for 6 or 12 seconds. The door lock is actuated with the outer knob. Arming: 1.
- Page 15 4. Present the tag to the reader again while coupled and then remove it. 5. The cylinder acknowledges the successful arming process with a red light. 1 x red Using the fallback tag: 1. Present a valid fallback tag to the reader. 2.
- Page 16 System is armed 1 x red System is disarmed 1 × green Battery Warning 3 × red, 2 × green Authorised fallback transponder was presented 1 × red, 2 × green Unauthorised fallback transponder was presented 4 x red No wireless connection to the wAppLoxx Control 1 x red The wAppLoxx Control is not ready for arming...
- Page 17 Possible acknowledgements of the wAppLoxx Pro Cylinder login/logout process: Login successful 2 × green Logout successful 3 × red Login failed 1 x red Fallback tag/reset card required to log out 10 x red Possible acknowledgements of the wAppLoxx Pro Cylinder initialisation: Communication with the outer knob possible 2 x red Communication with the wAppLoxx Control Pro possible...
- Page 18 Please contact your dealer or dispose of the products at the local collection point for electronic waste. ABUS Security Center GmbH & Co. KG Linker Kreuthweg 5 86444 Affing If you have any technical questions, please contact your specialist dealer.