Advertisement
1 × green
1 × green
Both cards are included in the scope of delivery of the wAppLoxx Pro Control
Operating the wAppLoxx Pro Cylinder
1 × green
Unlocking/opening/locking:
2 × green
wAppLoxx Pro oval – installation instructions
[13]
When the cylinder has recognised the reset card, it will
flash green briefly.
Once the cylinder has been successfully logged out, the
cylinder will light up green and return to its original
state.
A brief green flash signals that the tag is being read and sent.
1. Present a valid tag to the reader.
2. After presenting the tag:
2 × rapid green flashes.
3. Remove tag.
The system is coupled for 6 or 12 seconds.
The door lock is actuated with the outer knob.
Advertisement
