Advertisement
1 x red
Using the fallback tag:
1 × red, 2 × green
Possible acknowledgements of the wAppLoxx Pro Cylinder:
2 × green
3 x red
wAppLoxx Pro oval – installation instructions
[15]
4. Present the tag to the reader again while coupled and then
remove it.
5. The cylinder acknowledges the successful arming process
with a red light.
1. Present a valid fallback tag to the reader.
2. After presenting the tag:
rapid red and green flashing.
3. Remove tag.
Repeat process twice.
The system is coupled for 6 or 12 seconds.
The door lock is actuated with the outer knob.
Access
Access denied
Advertisement
