Standby Time; Soldering Iron; Error Codes; Technical Specifications - ersa i-CON Nano User Manual

Standby time

After a certain time, the appli-
ance reduces the soldering
temperature to save power.
To quit stand-by, press key or
cool the soldering tip by ap-
prox. 5 °C / 9 °F.
Default value: 5 Min.
Value range: 0 to 60 Min.
0 = Off
A Hold down both keys for a
prolonged period to open
the standby time menu.
B Adjust standby time by
pressing the keys (0 = Off).
C Wait five seconds to save
the value.

Error codes

In the event of an error, an
error code appears on the
display. The number above
the label 'Err' provides
information about the error
present.
Codes 7 und 8 indicate faults
in the heating element in the

soldering iron:

- Err7 Insert heating element
and press key.
- Err8 Change heating
element
For further information, go to
the following link:
http://www.ersa.com/nano
10
| English
Soldering iron
If required, the soldering
iron can be changed or
exchanged.
Use only soldering irons bear-
ing the description ERSA i-tool
nano.
Installation of the exchange
iron is by analogy the reverse
of the dismantling sequence.
A Turn appliance onto its
side.
B Pull cable of soldering iron
out of holders.
C Remove plug in the direc-
tion of the operating panel.

Technical specifications

i-CON nano soldering
station:
Power rating:
Operating voltage:
Temperature range:
Dimensions L x W x H:
Weight:
i-tool nano soldering iron:
Dimensions:
Weight:
Holder stand:
Dimensions L x W x H:
Weight:
SD card
Using a micro SD card will
permit further settings to be
made via software:
- Stand-by temperature & time
- Shutdown time
- Keylock function
- Display in °C or °F
- Up to 3 fixed temperatures
- Power functions can be as-
signed
For further information on
using the micro SD (HC) card,
please consult the software
manual.
Both software and the manual
can be downloaded free by
going to the following link:
http://www.ersa.com/nano
Order No.: 0IC1200A
68 watts
220 - 240 V ~ 50/60 Hz
110 - 120 V ~ 50/60 Hz
150 - 450 °C
300 - 842 °F
145 mm x 80 mm x 103 mm
1050 g
Order No.: 0120CDK
L x handle-ø / 175 mm x 12 mm
30 g (without cable)
Order No.: 0A050
140 mm x 80 mm x 80 mm
200 g