Troubleshooting - Zipper Mowers ZI-RTS700 Operation Manual

Do a thorough cleaning
Handle all moving parts with an environmentally friendly oil
16

TROUBLESHOOTING

Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Once the power supply and press
the power switch, the machine
switches off immediately
(Switch does not hold).
The motor of the machine hums
and does not come up to speed.
Saw does not brake from turning
off.
Z.I.P.P.E.R Maschinen Austria
Never use grease!
Possible cause
It lacks the network
side, the neutral line
Check fuses
Brake switch defective
www.Zipper-maschinen.at
TROUBLESHOOTING
Solution
Be remedied by a licensed master
electrician.
Warning:
The blocking of the control button to
work despite the lack of neutral line
can be destroyed by a short time the
switch.
We assume in this case, no Warran-
ty.
If necessary, replace blown fuses.
Replace brake (electrician consult)
Rolltischsäge / Roll table saw ZI-RTS700
Seite28