Technical Data; Safety; Safety Notes - Zipper Mowers ZI-RTS700 Operation Manual

11.2 Technical Data

Engine output P1
Voltage ~ frequency
Circular-saw blade
Circular-saw blade fixture
Cutting power
Operating height
Table length
Table width
Weight
Dimensions L x W x H:
12

SAFETY

12.1 Intended Use
The ZIPPER Roll table saw ZI-RTS700 may only be used for cutting logs without nails or other
foreign bodies. The Roll table saw is intended solely for cutting firewood, transverse to the fiber
direction, up to a diameter of 220 mm. Unauthorized modifications and tampering with the ma-
chine immediately invalidate all warranty and compensation claims.

12.2 Safety notes

To avoid malfunctions, damage and physical injury MUST be observed:
Safety must be observed and regularly inspected for completeness!
Warning signs and / or labels on the machine which have been removed must be
replaced immediately!
Unauthorized modifications and tampering with the machine immediately invalidate
all warranty and damage
In fatigue, lack of concentration or under the influence of drugs, alcohol or drugs work
is prohibited with the machine!
The machine may only be operated by qualified personnel enrolled.
Third people, especially children, and people are not trained to think of the work envi-
ronment away!
Z.I.P.P.E.R Maschinen Austria
5,2 kW S6 40%
400 V~50 Hz
Ø 700mm / 42 teeth
30mm
min. 80mm – max. 220mm
840 mm
1360 mm
820 mm
133 kg
1470 x 830 x 1570 mm
claims.
www.Zipper-maschinen.at
A C H T U N G
SAFETY
Rolltischsäge / Roll table saw ZI-RTS700
Seite20