Remote Control; Select Operation Mode; Call/Leave Menu - SMART Evolution II User Manual

Channel Assignment and Programming

4.3 Remote Control

No. Description
1 To switch between the operating and standby
modes.
2 0 ... 9 Direct channel selection or input of alphanumeric
characters
3 TV/R To switch between TV and radio modes.
4 PR+ Channel + or cursor up
5 EPG To start/finish Electronic Programme Guide
6 Volume - or menu option to the left
7 FAV To load favourite channel list
8 PR- Channel - or cursor down
9 INFO To show information on the current programme
10 TXT Video text
11 PAUSE Not used
12 F1 Not used
13 F2 Subtitles
14 F3 To show several programmes on screen (multi-
picture)
15 Not used
16 To switch to the previously selected channel
PR
17 MENU Main menu
18 OK To show channel list or confirm menu item
19 Volume + or menu option to the right
20 EXIT To exit menu or menu item
21 To scroll page up in menu
22 ZOOM Not used
23 To scroll page down in menu
24 L/R To change Audio mode
25 F4 To show all programmed satellites

4.4 Select Operation Mode


TV is the operation mode after first switching-on (or after restoration of factory settings).
You can select between the operation modes TV (TV channels) and RADIO (radio channels) as follows:
 Press the key TV/R on the remote control.
 Press again the key TV/R to return to the previous operation mode.

4.5 Call/Leave Menu

 To call the menu, press the key MENU.
 Press MENU once more or EXIT to leave the menu or to go back one step.
32
smart Evolution II