Safety Instructions; Intended Use; Risks In Case Of Intended Use - SMART Evolution II User Manual

2 Safety Instructions

2.1 Intended Use

The smart headend Evolution II is intended for the conversion of up to ten digital satellite channels to an
analog PAL signal. The Evolution II is exclusively intended for such purpose and must be used exclusively for
such purpose.
Any other use is deemed to be unintended use.

2.2 Risks in Case of Intended Use

Humidity, wrong mains voltage and/or wrong mains frequency, lightning stroke
or mechanical overload may cause malfunction of or damage to the device.
 Ensure that the headend (in particular the mains plug) and the remote control are not
exposed to any humidity.
 Only connect the headend to 175...250 V ~, 50/60 Hz.
CAUTION!  Disconnect mains plug in case of thunderstorms or malfunction.
 Do not place heavy items onto the headend.
 Do not bend or squeeze the cable.
Risk of electric shock when contacting mains voltage.
Damage to housing, mains cable or improper repair may result in contact to mains
voltage.
 Do not place heavy items onto the headend.
 Do not bend or squeeze the cable.
 The assembly, installation and service, e.g, repairs of plug, cable or headend, should
WARNING!
only be performed by qualified personnel.
 Make sure that the operating voltage of the system is shut down before beginning
installation or service work server, or that the mains plug is disconnected.
smart Evolution II
Safety Instructions
25