Channel Assignment And Programming; Standard Channel Assignment; Programming - SMART Evolution II User Manual

4 Channel Assignment and Programming

4.1 Standard Channel Assignment

As delivered, all ten channels of are pre-programmed. The channel allocation is:
Channel
21
23
25
27
29

4.2 Programming

If you want to use other than the ten programmed channels, you must re-program the modules accordingly.
To access the OSD of each module, you must connect a monitor, as described in Section 3.6, page 11.
To program the individual channels:
1. Press the button with the number of the channel you want to program. If a channel is selected the corre-
sponding LED illuminates (program mode).
2. Use the remote control (described below) to select a TV or radio program, which should be added to the
analog output signal.
either,
by selecting the desired channel using the keys PR+ and PR-,
or
by pressing OK, selecting the desired channel from the channel list using the keys PR+ and PR-and con-
firming with OK.
3. Press the button with the number of the channel with active programming mode. The corresponding
LED goes out.
smart Evolution II
Station
ARD
ZDF
RTL
Sat 1
Vox
Channel Assignment and Programming
Channel
31
33
35
37
39
Station
Pro 7
Arte
Das Vierte
Kabel 1
RTL2
31