and the infrared receiver are activated. Using the
remote control you can select the channel to be
converted.
The
system
1.4.1
Control Panel
No. Decription
1
Push buttons 1-10
LEDs 1-10
2
3
Infrared receiver
1.4.2
Connections
No. Decription
1
INPUT HH
2
INPUT VH
3
INPUT HL
4
INPUT VL
smart Evolution II
is
shipped
pre-
Select channels 1-10 for programming.
Show which channel is activated for programming.
Receives the infrared signal from the remote control during programming.
LNB input horizontal / high band
LNB input vertical / high band
LNB input horizontal / low band
LNB input vertical / low band
programmed, the channel assignment can be
found in section 4.1 on page 14.
General
23