Robot Coupe CMP 400 V.V. Manual page 5

INTRODUCTION TO YOUR
NEW ROBOT-COUPE
POWER MIXER
Robot-Coupe has developed a complete line of
power mixers. The features of each are described in
the table below.
Variable
Models
speed attachment
CMP 250 V.V. • •
• •
CMP 300 V.V.
CMP 350 V.V. • •
CMP 400 V.V. • •
• •
CMP 250 Combi
CMP 300 Combi • •
The Robot-Coupe Power Mixers perform a host of
culinary feats. The mixer attachment will allow you
to make soups, vegetable purees and pulps while
the whisk attachment is ideal for making pancake
batter, mayonnaise, beaten egg whites, chocolate
mousse, butter sauces, whipped cream or smooth
fromage frais.
The variable speed function will enable you to
adjust the speed to suit each preparation and to
start the processing at a lower speed in order to
reduce splashing.
The power mixer is easily assembled and
disassembled for maintenance and cleaning.
OPERATING
THE POWER MIXER
• OPERATION
The power mixer is equipped with electrical current
and temperature overload protection. If the power
6
mixer stops unexpectedly you may try to restart it
by following steps 3-5 below. If the power mixer
does not restart, allow it to cool for a period of up
to 30 minutes and the temperature overload will
automatically reset. You should then be able to
restart following steps 3-5 below.
1 . C h e c k t h a t t h e
control button (CB) is in
Mixer Whisk
the released position.
attachment
2. Connect the cord to
the power supply
3. Put the tube into the
product with the bell
completely immersed
•
and the splash guard
•
in place.
4. Press and hold down
the safety button (SB).
5. Press the control
button (CB) and the
power mixer will start.
6. Release the safety
button (SB).
7. To stop the power
m i x e r , r e l e a s e t h e
control button (CB).
• CONTINUOUS OPERATION
8. Follow steps 1-6 above, then: While the control
button (CB) is pressed, press the locking button (LB).
9. Release the control button (CB).
10. Release the locking button (LB), and the power
mixer will run continuously.
11. To stop the power mixer, press and release the
control button (CB).
• VARIABLE-SPEED OPERATION
Follow steps 1 to 6 above, then change the speed
of the motor by turning the button (VS) toward the
maximum or minimum as required.
It is advisable to start at a low speed when using the
whisk.
SB
VS
CB
• MIXER OPERATION
LB
Hold the blender firmly
by the handle and the
bottom of the motor
unit and tilt it at a slight
angle. Move the mixer
around in the container
for complete processing.
The power mixer can be
rested against the rim of
the container but must
be tilted so that it does
not touch the bottom of
the container.
I f u s i n g t h e p o w e r
mixer support (optional
accessory), on the top
of the container, the
power mixer should be
positioned in the middle
of the support and at
a slight angle. Do not
o p e r a t e t h e p o w e r
mixer with the bell
straight up-and-down
against the bottom of
the container.
The splashguard should always be in place.
WORKING POSITION