Robot Coupe CMP 400 V.V. Manual page 4

WARNING
: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse
of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to
know your appliance and enable you to use the equipment correctly. The operation manual should be kept within easy access to all users for
reference and should be read completely by all first time users of the machine.
• Carefully remove the equipment from the packa-
ging and take out all the boxes or packets contai-
ning attachments or specific items.
• Warning- Some parts are very sharp e.g. blade.
Wear cutting gloves when handling the blade.
• You are advised to install the wall bracket provided
with the machine and to store your Power Mixer on
it. Hang the mixer with the motor unit UP.
POWER SUPPLY
a. Connect the mixer to 110-120 Volt 60 Hz Power supply.
b. Connect the mixer only to Ground Fault Interrupt (GFI)
Safety type outlet.
c. Do not connect the mixer with extension type power cord.
d. GFI type outlets protect the machine from expensive
damage and protect the operator from serious injury
or death.
SPECIFICATIONS
• CMP 250 V.V. 120V/60Hz / 3 Amp.
• CMP 300 V.V. 120V/60Hz / 3.2 Amp.
• CMP 350 V.V. 120V/60Hz / 3.5 Amp.
• CMP 400 V.V. 120V/60Hz / 4 Amp.
• CMP 250 Combi 120V/60Hz / 3 Amp.
• CMP 300 Combi 120V/60Hz / 3.2 Amp.
IMPORTANT WARNING
UNPACKING
B
STORAGE
D
C
Blade Attachment Capacities
• Thanks to a very powerful motor, the CMP 250
can process up to 16 quarts, CMP 300 can process
up to 32 quarts, the CMP 350 up to 50 quarts, the
CMP 400 up to 65 quarts. The quality of the fini-
shed product is outstanding.
Whisk Attachment Capacities
• Using the whisk attachment CMP 250 Combi and
CMP 300 Combi process from 2 to 30 egg whites
and puree 2 to 70 pounds.
• Each power mixer is supplied with a wall support
for easy storage.
DIMENSIONS (in inches)
CMP 250 Combi CMP 300 Combi
A = 3 3 / A = 3 3 /
4 4
B = 25 5 / B = 27 9 /
8 16
C = 3 / C = 3 /
9 9
16 16
D = 11 3 / D = 13 11 /
4 16
E = 15 3 / E = 15 3 /
8 8
A
F = 4 3 / F = 4 3 /
4 4
CMP 250 V.V. CMP 300 V.V.
A = 3 3 / A = 3 3 /
4 4
B = 24 B = 26
C = 3 9 / C = 3 9 /
16 16
D = 8 7 / D = 12
8
E
CMP 350 V.V. CMP 400 V.V.
A = 3 3 / A = 3 3 /
4 4
B = 28 1 / B = 29 1 /
4 2
C = 3 / C = 3 /
9 9
16 16
D = 14 5 / D = 16 1 /
16 4
F
W A R N I N G
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
SAFETY FEATURES
• Safety on Control Switches
This safety mechanism prevents any unintentional
starting of the power mixer. Two buttons must be
pressed to start the power mixer. See section on
operating the power mixer.
• Safeties on motor : Thermal and overload pro-
tection.
If there is an obstruction in the container (a spoon
or ustensil) or the machine is overused and becomes
hot the power mixer will stop. If the power mixer
stops because of a thermal overload (power mixer
is too hot), wait for a period of up to 30 minutes for
the power mixer to cool down before restarting.
• No volt release safety (Supply failure).
If there is a power failure or the machine is
unplugged, the power mixer will not restart by
itself. See section on operating the power mixer.
• Be careful when handling the blades. They are
very sharp! Wear cutting gloves when handling
the blades.
WARNING
5