Inserting The Battery; Safety Information Regarding The Charger - Stromer ST2 Operating Manual

Push the key into the lock applying gentle pres-
sure and turn it in a clockwise direction until the
battery box opens.
Pull out the battery.
The battery is very heavy, so take care not to drop
it. You could get injured and/or the battery might
get damaged.

Inserting the battery

Place the battery into the battery box. Take care
that the connector points downwards and that the
lettering THIS SIDE UP is visible on top. Push the
battery downwards until it latches.
Close the battery box. Press with your flat hand
onto the flap until it latches with a soft click and
then pull the key out of the lock.
Never leave the key in the lock. You might get
injured by the protruding key or clothes might get
caught on it, which might lead to a fall.
Always pull the key out of the lock and keep it
at a safe place to ensure that it does not break
or get lost.
Safety information regarding
the charger
Read the operating instructions for the char-
ger before beginning to charge the battery.
You can change the battery of your Stromer while
it is installed in your S-Pedelec. However, you
can also remove the battery from the S-Pedelec
and charge it in another place. It is particularly
advantageous to charge it in a warmer environ-
ment (room temperature) when it is cold outside,
in order to shorten the charging period. Avoid
charging processes below 0 °C or above 40 °C and
in tightly sealed spaces. The charging process is
automatically stopped at temperatures below 0 °C
or above 40 °C.
Please note that a sudden change of tempera-
ture from cold to warm can cause condensation
to build up in the charger. Avoid this by storing
the battery in the same place where it is charged.
Only use the charger supplied or a charger re-
leased by Stromer to avoid the risk of fire.