Initial Setup; Charging Of Rechargeable Batteries - Grundig Digta 7 Push Quick Reference Manual

initial setup

charging of rechargeable batteries

WARning
Danger of explosion and burns!
• Rechargeable batteries should only be charged in the dicta-
tion machine or Digta Station 447 Plus*.
• Do not use damaged batteries.
x Switch your Digta off.
x Plug the power supply* plug to the wall outlet.
x Connect the other end of the mains supply cable – the USB
plug – with the "USB-connection" of your dictation machine.
Shortly aftterwards, the animated load indicator »
appears on the display. The current loading level is shown in
percentage.
The rechargeable battery is fully charged after approx.
4 hours. » « appears in the display.
x Disconnect the power supply* from the socket and the USB
plug from the "USB-connection" of your device.
Switching off/on
Switching on
x Press the "MENU" button until the initial display view appears
on the display.
After a few seconds, the Digta changes to the main screen
and is ready for operation.
Switching off
x Press the "MENU" button until the device switches off.
Keylock
The key lock helps to avoid that the active recording or play-
back process can be switched off by mistake.
x Please press the lower function button until a locking symbol
«
and "Device locked" are indicated on the display.
Except when recording and playing back, you can switch off the
device normally even when the buttons are locked.
When your Digta is switched off, the button lock feature prevents
the device from inadvertently being switched on, e.g. in your
initial setup
En
25