Section 1: Introduction; Before You Begin; Installation Overview; Specifications - DSC PC5502Z2 Installation Manual

Hide thumbs Also See for PC5502Z2:

Table of Contents

Sec ti on 1: I ntro duc t i on

The PC5502Z2 is a 2-zone keypad that allows you to install up to seven 2-zone partitions

on one control panel. The PC5502Z2 is compatible with the following control panels:

• PC580/585 v2.3 and higher

• PC1555/1565 v2.3 and higher

• PC5008 v2.3 and higher

• PC5010 v2.0 and higher

• PC5015 v2.2 and higher

This manual describes how to install, program and maintain PC5502Z2 keypads. Before

you install PC5502Z2 keypads, you should have completed the following steps in your

system installation:

1. Review your system's Installation Manual, and read this manual.

2. Plan the installation and wiring of the security system (see your system Installation

Manual)

3. Install the control panel as described in the Installation Manual.

4. Install and enroll one system keypad (PC5508Z, PC5516Z, PC5532Z, or LCD5500Z)

to use for programming the main control panel and for monitoring the status of the

entire system. Mount the system keypad in an area accessible only by personnel

authorized for security system access (e.g. a building supervisor). (See your system's

Installation Manual for instructions.)

NOTE: PC5502Z2 keypads will be "busy" whenever someone enters a [*][1-8]

function on the system keypad.

To install and set up the PC5502Z2 keypads, follow these steps:

1. Mount and wire the PC5502Z2 (see Section 2)

2. Enroll the PC5502Z2 with the control panel (see Section 3)

3. Complete PC5502Z2 programming at the PC5502Z2 keypad (see Section 4)

4. Complete the control panel programming at the system keypad (see Section 5)

• Connects to control panel via 4-wire Keybus

• Two keypad zone inputs (zone loop response time 500ms)

• Current draw: 17mA (standby), 25mA (max.)

• Five programmable function keys

• Ready (green), Armed (red) and System (yellow) status lights

Table of Contents