To Use Previously Stored Flatness Correction Data
Verify that the current external signal path is correct for the
atness correction table that
you want to recall from memory and use.
Select the
NNNNNNNNNNNNNNNNN
menu and then the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select
recall data.
Select
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
to use the
atness correction data when determining the output amplitude.
Programming Example
Related Tasks
3-40
Generating Signals
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
where x is the register (1 through 4) from which you wish to
so that On is underscored in order to enable the signal generator
Selects the
atness correction table in register
number four.
Enables all corrections
Turns
atness correction on.
menu.