Table of Contents
Advertisement
Enters the desired power level into variable \Me-
ter power."
Presets the signal generator.
Sets the output frequency to 4.2 GHz.
Sets the output amplitude .
Presets the power meter.
Changes power meter units from Watts to dBm.
Sets frequency at power meter to 4.2 GHz.
Selects Auto Range on the power meter.
Waits 5 seconds for the power meter to settle.
Selects Range Hold on the power meter.
Sets power meter to trigger with delay.
Waits 5 seconds for the power meter to settle.
Reads power from power meter into variable
\Meter reading."
Reads the initial power meter reading into the
signal generator.
Enables external power meter leveling.
Sets power meter to free run trigger.
Sets the output amplitude .
Related Tasks
Generating Signals
3-31
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
