HP 70341A User Manual page 68

Select the NNNNNNNNNNNNNNNNNNNNNNN function in order to enable internal leveling.
Set the controls of the pulse source to the desired pulse PRF and width.
If the RF output is o , turn it on by selecting
If necessary, turn o any unwanted modulation: LOG AM or FM by selecting the
Modulation menu and then selecting each function softkey so that O is underscored.
If your instrument does not have Option 1E2:
NNNNNNNNNNNNNNNNNNNNNNN
Select and then
Select normal (noninverted) or inverted pulse modulation with the
function.
If your instrument contains Option 1E2:
Select the NNNNNNNNNNNNNNNNNNNNNNN
Select NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
inverted pulse modulation.
Programming Example
3-16 Generating Signals
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
to turn pulse modulation on.
menu and then the NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
or NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN in order to choose between normal and
Sets the instrument to preset state.
Sets pulse source to external.
Sets external pulse polarity. Choose \NORM"
for non-inverted external pulse modulation or
\INV" for inverted external pulse modulation.
NNNNNNNNNNN
.
On
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
menu.
O