Table of Contents
Advertisement
Check that the HP 70340A module HP-MSIB address switches are set to the correct
address.
Display Con guration
Note
Connect the power cable(s) to the system and then to the power source.
Warning
This is a safety Class 1 product (that is, it is provided with a protective earth
terminal). An uninterruptible safety earth ground must be provided through the
power cable. Whenever it is likely that the ground is impaired, the product must
be made inoperative.
Swing the mainframe front panel door down.
1-4
Installing and Verifying the
Signal Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 1-2. The HP 70340A Address Switches
Figure 1-3. HP 70340A Module Installation
not
Advertisement
Table of Contents
